| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,149 Posts1,056,817 Members48,454 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#11879 11/25/2002 7:26 PM | Joined: Sep 2002 Posts: 7 Apprentice | | Apprentice Joined: Sep 2002 Posts: 7 | Hey...Can anyone tell me what hoses I need for my small block Chevy engine swap I did on my 40 Chev 1/2 ton? I have a short water pump and a new Walker radiator made for a 40 Chev. I'm hoping there is a hose made for something else that can be cut and used for this application. I've been looking and have found some that are close for the top, but nothing for the nasty curve on the lower hose. Thanks!!!!! | | |
#11880 11/25/2002 8:40 PM | Joined: May 2000 Posts: 234 Shop Shark | | Shop Shark Joined: May 2000 Posts: 234 | You'll either have to find something close by bending a piece of wire to shape and comparing it against the hoses in the parts store, or get one of those "universal" types that look like bendy straws.
I know, I don't like the looks of them either. But I'll bet there's a hose out there with the right bend, that might just need to be cut down to size.
-Boyo
'48 Willys CJ-2A / '55.1 Chevy 3600 / '66 Austin-Healey 3000 / '04 Volvo wagon (parenthood!?)
| | |
#11881 11/27/2002 2:20 AM | Joined: Feb 2001 Posts: 96 Shop Shark | | Shop Shark Joined: Feb 2001 Posts: 96 | On my 46 with a 350 and walker and long water pump. I used a universal like Boyoconnor described. It was a gates 26603. It's a tight bend but worked. | | |
|
|
| |
