| |
Click on image for the lowdown. 
====
| | |
9 members (Peggy M, Otto Skorzeny, tclederman, Shade Baby, DadsFirstPickup, FAST55, Bucker, wilbur53, 1 invisible),
78
guests, and
4
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,159 Posts1,056,900 Members48,458 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jul 2015 Posts: 3 New Guy | | New Guy Joined: Jul 2015 Posts: 3 | I have swapped out a 261 to a 350 small block motor and trans truck is still on original frame but in order to do the swap had to unbolt the steering box from frame. The box will not fit back due to the 350 motor I need help on what I can do to try to use original steering or what I need to do Thanks in advance. | | | | | Joined: Feb 2004 Posts: 29,852 Kettle Custodian (pot stirrer) | | Kettle Custodian (pot stirrer) Joined: Feb 2004 Posts: 29,852 | Find a left exhaust manifold from a 55-57 passenger car 265. It's about the narrowest manifold out there, and I believe it will give you just enough room for the steering column. Another option is offsetting the engine/trans assembly a couple of inches toward the passenger side, but that's sort of a Mickey Mouse method of dealing with the problem.
Edit: what happened to the 261 you took out? PM me if it's available.
Jerry
"It is better to be silent and be thought a fool than to speak and eliminate all doubt!" - Abraham Lincoln
Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt!
There is nothing noble in being superior to your fellow man; true nobility is being superior to your former self. - Ernest Hemingway
Love your enemies and drive 'em nuts!
| | | | | Joined: Dec 2013 Posts: 54 Wrench Fetcher | | Wrench Fetcher Joined: Dec 2013 Posts: 54 | You can also move the steering box @ 1.5 inches further out towards the wheel. Weld a piece steel level with the top of the frame to accomplish this. I used a piece of angle iron and trimmed one leg to get my 1.5 inches out and used the other leg to bolt the lower outside box mounts to.
There are a couple of pictures in the 3600 link in my sig.
Tim
Last edited by sleepindawg; 12/02/2015 12:56 AM.
| | |
|
|
| |
