| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | |
0 members (),
37
guests, and
5
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,009 Posts1,055,293 Members48,419 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Sep 2004 Posts: 7 Junior Member | | Junior Member Joined: Sep 2004 Posts: 7 | Thanks for the advice! Sandblasting sounds like the ticket, however I'm not sure about taking my cab off. I'm kind of afraid that I would be able to figure out how to get everything back on it. Or for starters just taking it off. The cab is pretty cancerous. It is really bad and I also clueless about what to do with it. I guess I could just be a soup sandwich! I really have the drive and desire to get this done, but as I said I'm clueless. | | | | | Joined: Jan 2003 Posts: 687 Shop Shark | | Shop Shark Joined: Jan 2003 Posts: 687 | GV: Start by going to car truck shows see what you might want yours to look like. Talk to the guys, take pictures, ask questions. The main thing don't jump in and go hap hazard. It does not work.
Cabs can be bought frames can be beautiful mine is start with a good plan and then improve on it.
You can spend as much money as you want fixing these things up if thats what you want to do. But the fun thing is getting your hands dirty and learning. Ben
popcorn The Truth is Out There (Make a plan and remember 1 step at a time. Do not look at it as a huge project but a hand full of many little ones) | | | | | Joined: Sep 2004 Posts: 7 Junior Member | | Junior Member Joined: Sep 2004 Posts: 7 | | | |
|
|
| |
