The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Help is a click away!

VEHICLE
INFORMATION
KITS


at the

GM Heritage Center
All the details are here.

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
3 members (MNSmith, Tronman, Shade Baby), 76 guests, and 0 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,051
Posts1,055,762
Members48,426
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#106937 08/07/2002 8:44 AM
Joined: Aug 2002
Posts: 3
J
Junior Member
Junior Member
J Offline
Joined: Aug 2002
Posts: 3
I HAVE A 52 HALF TON PICKUP. WONDERING IF A GRILL FROM A 1 TON, 1 1/2 TON, OR A 2 TON WILL WORK. I WAS TOLD THAT THE GRILLS ON THE LARGER TRUCKS ARE JUST TALLER BUT THE BARS ARE THE SAME SIZE AND CAN BE PUT ON THE FRAME OF A HALF TON GRILL. IS THIS TRUE OR IS IT NOT. ANY INFO WILL HELP??

Joined: Aug 2001
Posts: 13
C
Member
Member
C Offline
Joined: Aug 2001
Posts: 13
1/2, 3/4, and 1 ton grills are interchangeable.
The larger trucks' grills will not fit properly.
The cabs and hoods are the same, with the exception of COE.

Joined: Aug 2000
Posts: 197
R
Member
Member
R Offline
Joined: Aug 2000
Posts: 197
Juggman you are correct. I used the horizontal grill bars from a big truck and the vertical bars from the stock grill to end up with a good grill. The big trucks have more substantial bumpers and protection from mishaps. wink The hoods on the larger trucks (I think 1.5 ton and up) are longer as well as the fenders and hood latch panel.


Jason
A
Anonymous
Unregistered
Anonymous
Unregistered
A
The 1 1/2 ton & up [ including the C.O.E.] grill bars will work if you install them on the 1/2 ton grill rear bars & upright brackets. The 1 1/2 ton & up grill bars are the same width as the 1/2 ton but, they are 1/2 " taller. The top bar on these larger trucks wont fit the contour of the smaller hoods, I use a 1/2 ton top bar here. Although it is 1/2" shorter than the other bars , you cant tell the difference because the parking lights are under it .
1/2 to 1 ton fenders, hoods & grills are identical. 1 1/2 ton & up fenders, hoods & grills are larger. Cabs are identical on all conventional models. Cabs were only different when you jumped up to the COE models


Moderated by  klhansen 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0