| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,023 Posts1,055,367 Members48,420 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Oct 2001 Posts: 578 'Bolter | | 'Bolter Joined: Oct 2001 Posts: 578 | I'm going to rattle-can an area on my bed. I'll do a bit of sanding and then a good wash. What do I do a final clean with? Laquer thinner? Simple green? I want to get rid of any wax, grease, oil.
"Happiness equals reality minus expectations" - Tom Magliozzi
| | | | | Joined: Apr 2005 Posts: 36 New Guy | | New Guy Joined: Apr 2005 Posts: 36 | I normally use Dupont final clean and or enamel lacquer thinner.
But what you can do is first wash the area with HOT water and dish washer soap. anytime you do body work that area should always be washed that way before sandding or you will inbed and wax or grease into the paint primmer and even metal.
Then dry with compressed air or new white cotton towels. Then before paint either use lacquer thinner or alcohol. You want to use Blue tork towels wipe it on really wet then with another towel wipe it off. And you should be ready for paint.
DustyG.
1952 Chevy 1.5 ton
1949 Gmc 2 ton flatbed Dump
| | |
|
|
| |
