Click on image for the lowdown. 
====
| | | Forums66 Topics128,076 Posts1,055,920 Members48,429 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Sep 2010 Posts: 53 Wrench Fetcher | | Wrench Fetcher Joined: Sep 2010 Posts: 53 | Are the running boards bolted onto the front fenders as well as the back fenders?
Thanks so much.
Ken | | | | | Joined: Sep 2001 Posts: 29,269 Bubba - Curmudgeon | | Bubba - Curmudgeon Joined: Sep 2001 Posts: 29,269 | | | | | | Joined: Sep 2010 Posts: 53 Wrench Fetcher | | Wrench Fetcher Joined: Sep 2010 Posts: 53 | In reply to "No - 1954 3600" Sorry for the late reply, having box issues jump out at me.. I am sure there is a 54 3600 long box, all the Canadian documents I have says it is and the Ministry of Transportation agrees. It was made in Ontario. pic 1 pic 2 pic 3 pic 4 So is it just the back that is bolted? Thanks. Ken
Last edited by cletis; 10/11/2014 2:18 AM. Reason: repaired links
| | | | | Joined: May 2001 Posts: 7,438 Extreme Gabster | | Extreme Gabster Joined: May 2001 Posts: 7,438 | Yes, just the back.
Canadian trucks didn't use the 3600 designation. | | | | | Joined: Sep 2001 Posts: 29,269 Bubba - Curmudgeon | | Bubba - Curmudgeon Joined: Sep 2001 Posts: 29,269 |
There is one size 1954 3600 box (Chevrolet 3/4 ton in USA). It is not a long box; it is a 3600 box, which is longer than the 3100 box and shorter than the 3800 box. I am not sure about Canadian Chevrolet trucks having long/short boxes on 1/2 tons and/or on 3/4 tons.
1954 USA GMCs had a 1/2 ton short box and a 1/2 ton long box. I think the 3/4 ton GMCs had one-size bed (the same length as the 1/2 ton long bed).
"Are the running boards bolted onto the front fenders as well as the back fenders?" Sorry about my terse "no" answer, but it correctly answered your question.
Was/is your running board connected to the front fender?
| | | | | Joined: Sep 2010 Posts: 53 Wrench Fetcher | | Wrench Fetcher Joined: Sep 2010 Posts: 53 | See that is my dilemma, I did not disassemble the truck, I had a guy I know frame off it for me, after a couple years of "issues" we parted ways. I have been assembling this truck myself with a few old pictures, a few books and of course this awesome site. I had the bed wood made for me out of oak, it measures 89" long and the widths are 4 1/4", 5" and 7 1/4" as is shown here. cletis, what was the designation 3/4 ton trucks had in Canada if they didn't have the 3600 designation? Thanks for the replies. Ken | | | | | Joined: May 2001 Posts: 7,438 Extreme Gabster | | Extreme Gabster Joined: May 2001 Posts: 7,438 | I'm not familiar with the Canadian production series numbers. | | | | | Joined: Sep 2001 Posts: 29,269 Bubba - Curmudgeon | | Bubba - Curmudgeon Joined: Sep 2001 Posts: 29,269 | http://www.oldgmctrucks.com/page0396.htmlMy guess is 1420 or 1430 for 3/4 ton Chevrolet (shortbed or longbed) | | | | | Joined: Nov 2005 Posts: 6,100 'Bolter | | 'Bolter Joined: Nov 2005 Posts: 6,100 | Hy Guys, Canadian 1420s are equivalent to American 3600s, Canadian 1430s are equivalent to American 3800s, hope that clarifies. | | | | | Joined: Sep 2010 Posts: 53 Wrench Fetcher | | Wrench Fetcher Joined: Sep 2010 Posts: 53 | 3B, thanks for the info, so would that mean they would have 1420 as a chrome emblem on the hood?
Thanks.
Ken | | | | | Joined: Feb 2002 Posts: 12,029 Cruising in the Passing Lane | | Cruising in the Passing Lane Joined: Feb 2002 Posts: 12,029 | Ken, the side emblems are all 'generic', it would have a 1400 emblem
Bill | | |
|
|
