| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,201 Posts1,057,279 Members48,466 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#10526 08/09/2002 2:53 AM | Joined: Jul 2002 Posts: 91 Member | | Member Joined: Jul 2002 Posts: 91 | Need help again.
I am in progress of dismanling my engine, 235
how do seperate the pully from the crank shaft.
I cant find lock screws or nuts.
Thanks for your help
:confused: | | |
#10527 08/09/2002 3:50 AM | Joined: Mar 2002 Posts: 9,115 'Bolter | | 'Bolter Joined: Mar 2002 Posts: 9,115 | Do a search for the thread on this topic. It has been covered quite well. You will need a puller that uses bolts that thread into the pully. | | |
#10528 08/09/2002 2:16 PM | Joined: Jun 2000 Posts: 2,773 'Bolter | | 'Bolter Joined: Jun 2000 Posts: 2,773 | There should be two threaded holes in the harmonic balancer. You will need a balancer puller which works like a gear puller. You should be able to rent or borrow one from your parts store. [img] http://www.harborfreight.com/cpi/photos/37700-37799/37714.gif[/img] Also, while you have the crankshaft out, get the end drilled and threaded for a retaining bolt. This will help a lot when putting the balancer back on and will allow you to use a bolt to make sure it stays in place.
Fred
52 3600
69 C-10
| | |
|
|
| |
