| |
Click on image for the lowdown. 
====
| | |
7 members (jay d, Bill Hanlon, RaNfLaS, GMCJammer51, DadsFirstPickup, Tyler Watts, Steelonsteel),
94
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,048 Posts1,055,663 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Nov 2001 Posts: 182 Wrench Fetcher | | Wrench Fetcher Joined: Nov 2001 Posts: 182 | I'm going to be doing some filler work and sanding the epoxy primer on my 52. I know you're not supposed to sand by hand, but with a block...anyone use these flexible block sanders I see around? Thanks. | | | | | Joined: Sep 2003 Posts: 151 Wrench Fetcher | | Wrench Fetcher Joined: Sep 2003 Posts: 151 | I'm working on a '46 Panel and I primed the rear fenders after sanding them down by hand, random orbit and 1/4 sheet sanders. These fenders looked like the ocean during a storm. Now I've done alot of woodworking and have a pretty good feel for smoothness but not this time they were a wreck. I had to order a 16" Flex block sander but when it came in and I redid the fenders. Just like a babies bottom. I am by no means a bodyman, heck I'm learning as I go but this is one lesson I learned very well 
David
Just a firefighter,
Cleverly disguised as a responsible adult
'46 1/2 T Panel
| | |
|
|
| |
