| |
Click on image for the lowdown. 
====
| | |
7 members (55shaker, Tim Canfield, moparguy, Hotrod Lincoln, Gdads51, Bill Hanlon, treegrower),
132
guests, and
0
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,195 Posts1,057,380 Members48,469 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2005 Posts: 396 Shop Shark | | Shop Shark Joined: Apr 2005 Posts: 396 | It mentions Remove the Vibrator tube before applying 6 v power to radio, then check that the other tubes are lighting and warming up. Sound great BUT which is the vibrator tube? Please and Thank you.
Jerry
Jerry
| | | | | Joined: Mar 2002 Posts: 9,115 'Bolter | | 'Bolter Joined: Mar 2002 Posts: 9,115 | Have a look at this photo in the manual. Radio Top Chassis View You will see a large can like affair in the upper right corner. At the base you can see little flanges that guide it into place when plugging it in. That is the vibrator and it pulls right out. Make sure that the little flanges surround the bottom. There is another can on the chassis that is permanently mounted. It contains the electrolytic capacitors. | | |
|
|
| |
