The Stovebolt Site Forums The Shop Area Making a Stovebolt Bed Wood for 1/2 ton bed

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

5 members (klhansen, Ponchogl, Shade Baby, GIJOE298, Steelonsteel), 133 guests, and 3 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,142

Posts1,056,782

Members48,454

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: Wood for 1/2 ton bed Cosmo #988340 11/24/2013 1:33 AM
Joined: Mar 2013 Posts: 235 Bethesda, MD R Ritchie 54 Shop Shark
Ritchie 54 Shop Shark R Joined: Mar 2013 Posts: 235 Bethesda, MD	I milled all my IPE for the bed today - same as DavidF. For those planning on doing this themselves, start with an edge cut with a table saw and then use a 1/4" or 3/16" straight shank router bit for the deeper section. Mine came out great. Straight shank router bit set-up Milled bed wood ready for finishing Bob 1954 Chevy 3100 5-Window 1954 5-Window COE aka "THE BEAST" Bill Ritchie's Original Truck Granddad's Hardware Store: Ritchie Hardware, Concord, N.C. Bethesda, MD

Entire Thread
Subject	Posted By	Posted
Wood for 1/2 ton bed	Cosmo	01/13/2002 2:58 PM
Re: Wood for 1/2 ton bed	k10	01/13/2002 3:28 PM
Re: Wood for 1/2 ton bed	Russell	01/14/2002 12:14 AM
Re: Wood for 1/2 ton bed	dabond	01/14/2002 3:07 AM
Re: Wood for 1/2 ton bed	wmchulo	01/14/2002 6:34 AM
Re: Wood for 1/2 ton bed	chuckthetruck	01/14/2002 12:11 PM
Re: Wood for 1/2 ton bed	rat	01/14/2002 12:54 PM
Re: Wood for 1/2 ton bed	Brian	01/14/2002 2:37 PM
Re: Wood for 1/2 ton bed	bigbassmann	01/15/2002 4:57 AM
Re: Wood for 1/2 ton bed	Cosmo	01/15/2002 12:43 PM
Re: Wood for 1/2 ton bed	Tony	01/15/2002 1:40 PM
Re: Wood for 1/2 ton bed	52pu	01/15/2002 4:34 PM
Re: Wood for 1/2 ton bed	Russell	01/15/2002 11:48 PM
Re: Wood for 1/2 ton bed	Fred T	01/16/2002 9:39 AM
Re: Wood for 1/2 ton bed	52Carl	08/14/2013 10:18 PM
Re: Wood for 1/2 ton bed	CASO	08/14/2013 11:45 PM
Re: Wood for 1/2 ton bed	GWWirth	08/15/2013 12:23 AM
Re: Wood for 1/2 ton bed	tclederman	08/15/2013 10:47 AM
Re: Wood for 1/2 ton bed	Flxible	08/15/2013 11:28 AM
Re: Wood for 1/2 ton bed	tclederman	08/15/2013 12:00 PM
Re: Wood for 1/2 ton bed	52Carl	08/15/2013 12:55 PM
Re: Wood for 1/2 ton bed	jmoore	08/15/2013 1:24 PM
Re: Wood for 1/2 ton bed	Flxible	08/15/2013 2:24 PM
Re: Wood for 1/2 ton bed	52Carl	08/15/2013 10:21 PM
Re: Wood for 1/2 ton bed	Deve	08/15/2013 8:55 PM
Re: Wood for 1/2 ton bed	Flxible	08/15/2013 9:52 PM
Re: Wood for 1/2 ton bed	Deve	08/15/2013 10:03 PM
Re: Wood for 1/2 ton bed	Truckrolet	08/16/2013 4:42 AM
Re: Wood for 1/2 ton bed	Deve	08/16/2013 8:47 PM
Re: Wood for 1/2 ton bed	Denny Graham	08/18/2013 1:43 PM
Re: Wood for 1/2 ton bed	Organbuilder	08/18/2013 2:12 PM
Re: Wood for 1/2 ton bed	Hollow65	08/18/2013 3:46 PM
Re: Wood for 1/2 ton bed	Flxible	08/18/2013 5:15 PM
Re: Wood for 1/2 ton bed	Hollow65	08/18/2013 5:22 PM
Re: Wood for 1/2 ton bed	Deve	08/18/2013 5:47 PM
Re: Wood for 1/2 ton bed	Ritchie 54	08/18/2013 5:56 PM
Re: Wood for 1/2 ton bed	DavidF	08/19/2013 11:52 AM
Re: Wood for 1/2 ton bed	52Carl	08/19/2013 8:43 PM
Re: Wood for 1/2 ton bed	Denny Graham	08/20/2013 8:52 PM
Re: Wood for 1/2 ton bed	Deve	08/20/2013 9:27 PM
Re: Wood for 1/2 ton bed	rpinnt90	08/21/2013 7:54 AM
Re: Wood for 1/2 ton bed	Ritchie 54	08/20/2013 10:09 PM
Re: Wood for 1/2 ton bed	DrewP	08/21/2013 7:21 AM
Re: Wood for 1/2 ton bed	Denny Graham	08/21/2013 9:00 AM
Re: Wood for 1/2 ton bed	DrewP	08/21/2013 9:28 AM
Re: Wood for 1/2 ton bed	Flxible	08/21/2013 9:31 AM
Re: Wood for 1/2 ton bed	Deve	08/22/2013 6:27 PM
Re: Wood for 1/2 ton bed	52Carl	08/22/2013 10:41 PM
Re: Wood for 1/2 ton bed	CASO	08/22/2013 10:45 PM
Re: Wood for 1/2 ton bed	UncleFranks 56	08/25/2013 4:42 PM
Re: Wood for 1/2 ton bed	DavidF	11/04/2013 5:54 PM
Re: Wood for 1/2 ton bed	53Movinon	11/05/2013 5:01 AM
Re: Wood for 1/2 ton bed	Ritchie 54	11/05/2013 1:53 PM
Re: Wood for 1/2 ton bed	53Movinon	11/05/2013 9:04 PM
Re: Wood for 1/2 ton bed	Ritchie 54	11/06/2013 2:44 AM
Re: Wood for 1/2 ton bed	Ritchie 54	11/24/2013 1:33 AM
Re: Wood for 1/2 ton bed	Ritchie 54	12/16/2013 2:05 PM
Re: Wood for 1/2 ton bed	DrewP	12/16/2013 4:27 PM
Re: Wood for 1/2 ton bed	Britcon	12/16/2013 6:33 PM
Re: Wood for 1/2 ton bed	DrewP	12/16/2013 9:29 PM
Re: Wood for 1/2 ton bed	Ritchie 54	12/16/2013 11:46 PM
Re: Wood for 1/2 ton bed	GMJager	12/25/2013 7:24 PM
Re: Wood for 1/2 ton bed	Ritchie 54	12/26/2013 4:30 PM
Re: Wood for 1/2 ton bed	DavidF	03/05/2014 11:01 PM
Re: Wood for 1/2 ton bed	1955 1/2 resto	03/18/2014 9:37 PM
Re: Wood for 1/2 ton bed	Ritchie 54	03/20/2014 12:13 AM
Re: Wood for 1/2 ton bed	5150scott	03/20/2014 2:14 AM
Re: Wood for 1/2 ton bed	Ritchie 54	03/20/2014 12:04 PM
Re: Wood for 1/2 ton bed	5150scott	03/20/2014 1:00 PM
Re: Wood for 1/2 ton bed	DavidF	06/04/2014 3:38 PM
Re: Wood for 1/2 ton bed	GMJager	06/04/2014 5:50 PM
Re: Wood for 1/2 ton bed	Ritchie 54	06/04/2014 11:54 PM

Moderated by klhansen

Hop To

Link Copied to Clipboard