| |
Click on image for the lowdown. 
====
| | |
9 members (Gray_Ghost, cmayna, treegrower, Barney1951, UtahYork, Rusty Rod, TUTS 59, Rusty Heaps, 49choptop),
102
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,067 Posts1,055,877 Members48,428 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jun 2000 Posts: 2,773 'Bolter | | 'Bolter Joined: Jun 2000 Posts: 2,773 | Shimmed mains work fine, if they are properly done. However, a good machinist can grind the crank to match a set of bearings. It takes a little more work, since the bearings must be set in place, miked, then the crank ground. Must crank grinders simply grind to specs in a manual.
Fred
52 3600
69 C-10
| | |
|
|
| |
