| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | |
2 members (cmayna, baldeagle),
77
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,005 Posts1,055,264 Members48,418 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2007 Posts: 1,038 'Bolter | | 'Bolter Joined: Apr 2007 Posts: 1,038 | My '42 Chevy pickup never had the original seat back. Currently I have a piece of plywood that has been upholstered. Recently, I came across a decent seat back frame and springs. At the top there are two hooks which fit nicely into slots in the cab sheet metal below the rear window.
At the bottom of the seat there are two extensions or tabs that stick down. When the seat back is hung in the slots, these tabs don't engage with anything. They are too short to reach the seat bottom base.
Am I missing some sheet metal or does the seat back just hang from the top hooks?
| | |
|
|
| |
