| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,035 Posts1,055,445 Members48,422 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Aug 2012 Posts: 566 Shop Shark | | Shop Shark Joined: Aug 2012 Posts: 566 | Here is what I did. I used 3'6" of 3/8" and I unbolted the last bolt going into the head (closest to the firewall on the carb side) and I used the bolt hole on the front of the motor besides the thermostat housing. Just make sure you get the threads all the way in and use washers. My cherry picker was a one ton lift from HF that worked for me. Just go slow.
"As I lay rubber down the street, I pray for traction I can keep, but if I spin and begin to slide, please dear God protect my sweet ride." -Amen 56 Chevy 3100 | | |
|
|
| |
