The Stovebolt Site Forums The Shop Area Engine Shop 1948 216 Main bearing shims are too thick and too few-

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

0 members (), 172 guests, and 3 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,196

Posts1,057,395

Members48,471

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: 1948 216 Main bearing shims are too thick and too few- truckernix #981165 10/25/2013 12:38 AM
Joined: Jan 2013 Posts: 1,384 MA J Jim Sears Shop Shark
Jim Sears Shop Shark J Joined: Jan 2013 Posts: 1,384 MA	Try soaking one stack in a cap with Power Blaster. After a while hold the stack by one end and slide the other end across a course file. Then look closely at the end, you will be able to separate them.

Entire Thread
Subject	Posted By	Posted
1948 216 Main bearing shims are too thick and too few-	freezerburn	10/24/2013 8:17 PM
Re: 1948 216 Main bearing shims are too thick and too few-	truckernix	10/24/2013 9:17 PM
Re: 1948 216 Main bearing shims are too thick and too few-	Jim Sears	10/25/2013 12:38 AM
Re: 1948 216 Main bearing shims are too thick and too few-	truckernix	10/25/2013 1:22 AM
Re: 1948 216 Main bearing shims are too thick and too few-	Bolter2	10/25/2013 1:26 AM
Re: 1948 216 Main bearing shims are too thick and too few-	brokenhead	10/25/2013 2:52 PM
Re: 1948 216 Main bearing shims are too thick and too few-	Pre '68 Dave	10/25/2013 4:17 PM
Re: 1948 216 Main bearing shims are too thick and too few-	freezerburn	10/25/2013 6:47 PM
Re: 1948 216 Main bearing shims are too thick and too few-	brokenhead	10/26/2013 2:05 AM
Re: 1948 216 Main bearing shims are too thick and too few-	Pre '68 Dave	10/26/2013 6:28 AM
Re: 1948 216 Main bearing shims are too thick and too few-	freezerburn	11/26/2013 5:13 PM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard