| |
Click on image for the lowdown. 
====
| | |
0 members (),
136
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,193 Posts1,057,259 Members48,466 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: May 2006 Posts: 8,351 'Bolter | | 'Bolter Joined: May 2006 Posts: 8,351 | The gear kit from Patrick's will only work in 1/2 tons. With the 3/4 and 1 ton stock rear, the 4.10 from the '68-'72 3/4 is the highest gear you'll find. Otherwise, a complete rear swap is in order for anything higher. A good source for a 3.55 gear would be to check under Dodge or Ford vans. That gear in a Dana 60 housing is very common, and the overall width is just right for an AD truck. Be aware, though, that many of these are semi float, rather than full float like the originals.
Bill Burmeister
| | | |
Entire Thread
|  
1953 3/4 ton,change rear end gears
| jeffw | 07/09/2013 9:33 AM | |
Re: 1953 3/4 ton,change rear end gears
| 3B | 07/09/2013 10:37 AM | |
Re: 1953 3/4 ton,change rear end gears
| harryr | 07/09/2013 12:42 PM | |
Re: 1953 3/4 ton,change rear end gears
| Bruce Ioppinni | 07/10/2013 1:14 PM | |
Re: 1953 3/4 ton,change rear end gears
| EdPruss | 07/09/2013 2:39 PM | |
Re: 1953 3/4 ton,change rear end gears
| jeffw | 07/09/2013 4:05 PM | |
Re: 1953 3/4 ton,change rear end gears
| funtime | 08/14/2013 11:57 PM | |
Re: 1953 3/4 ton,change rear end gears
| Denny Graham | 08/15/2013 2:01 PM | |
Re: 1953 3/4 ton,change rear end gears
| Murraydave | 08/17/2013 9:42 PM | |
Re: 1953 3/4 ton,change rear end gears
| LONGBOX55 | 08/17/2013 10:45 PM | |
Re: 1953 3/4 ton,change rear end gears
| Denny Graham | 08/18/2013 1:17 PM | |
|
|
| |
