Originally Posted by FPMnky
http://imgur.com/h9mEFN2

Well after doing some investigating there are 2 issues. 1. I found the leak, it's the manifold donut. Second issue is the linkage for the throttle, if I press the peddle all the way down it will get stick in the bolt in the manifold donut. Any suggestions there?
I assume it's hitting on the end of that flange? Can you get in there with a grinder or a file and just take a little bit off? I wouldn't think you'd need to remove much.

Rich
1947 Loadmaster
1947 Chev. Loadmaster
1959 Chev. Viking 40

Life is short--eat dessert first!