| |
Click on image for the lowdown. 
====
| | |
9 members (Wally / Montana, UtahYork, Frank50, BarryP, BC59, cmayna, DadsFirstPickup, Gray_Ghost, 1 invisible),
125
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,134 Posts1,056,740 Members48,454 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Feb 2013 Posts: 614 'Bolter | | 'Bolter Joined: Feb 2013 Posts: 614 | I just reinstalled my new rebuilt head and was connecting the new oil feed line using some of the original brass fittings. I noticed that the fitting coming from the block to supply the oil, only has a small orifice hole. Is this normal or did someone install a different fitting. It would be my opinion that it should be the same diameter at the 1/8" tubing to get plenty of oil up top. Any feedback would be appreciated. | | |
|
|
| |
