| |
Click on image for the lowdown. 
====
| | |
3 members (52Carl, bluechev, 1 invisible),
83
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,030 Posts1,055,418 Members48,422 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2007 Posts: 1,038 'Bolter | | 'Bolter Joined: Apr 2007 Posts: 1,038 |
George,
As best I can tell from your photobucket pictures, you have the correct top hinge. Perhaps you could put a better and closer picture on your photobucket for us to see. I think the service manual shows a standard cab, which has a different top hinge than your COE.
Both of the hinge "straps" inside the door have slotted holes. These allow you to adjust the door in the opening. The top hinge is behind the cardboard panel at the top of the door. The bottom hinge is accessed after removing three hole plugs(which is very different than a standard door). These plugs are often missing and you may just have the uncovered access holes. By gently loosening the bolts you can tweak the alignment of the door.
Hope this helps.
By the way, I didn't see you this year at the Watson Lake show!
Kent
| | |
|
|
| |
