Hi All,
After three days of penetrating oil and elbow grease, the two bolts for the master cylinder are not budging. I was able to remove the hydraulic line and the armature/rod cotter and pin.
Is there anything apecial I need to know about the MC mounting bolts? I assume the nut on the backside of the bracket is welded to the bracket? Is this mounting bolt only threaded to the bracket nut or are there threads through the MC assembly?
Is it ok to apply brute force to these bolts to get them to release?
MC Mounting Bolts MC Mounting Bolt Bracket Nut Thanks!
jose
