| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,162 Posts1,056,932 Members48,458 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#93937 12/17/2005 8:59 PM | Joined: Jan 2000 Posts: 2,074 'Bolter | | 'Bolter Joined: Jan 2000 Posts: 2,074 | You don't need to lose your original starter pedal! I'm using the mini hei from Langdon's in my 46 pickup 261 motor works great. I kept the original 6 volt starter and floor pedal linkage as only starter trouble I've had was the solenoid. Tom sent pretty detailed sheet of instructions. States you need a #10 size wire to the new coil from ign switch, per supplied drawing. I also went with a new set of Ford 300 six ign wires. Let me know if you need any other info or help I could take dig photos if needed. | | |
|
|
| |
