The Stovebolt Site Forums The Shop Area Driveline replacing bearings and the new rollers dont go all the way on

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

4 members (Hanks custodian, GMCJammer51, 3B, 1 invisible), 127 guests, and 1 robot.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,196

Posts1,057,386

Members48,469

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: replacing bearings and the new rollers dont go all the way on AZgeoman #933943 04/08/2013 9:33 AM
Joined: Feb 2002 Posts: 12,029 north of the 49th F Flxible Cruising in the Passing Lane
Flxible Cruising in the Passing Lane F Joined: Feb 2002 Posts: 12,029 north of the 49th	outer: MBS 909001R: bore=19.057mm/ diameter= 52.832mm/ Ball Bearing [B01]: Bore=19.044mm/ Diameter= 52.8447mm Inner: MBS 909052R: bore:32.550mm/ diameter=72.260mm/ Ball Bearing [B40]: Bore=31.760mm/ Diameter=65.1256mm/ Bill Moved over to the Passing Lane "When we tug a single thing in nature, we find it attached to the rest of the world" ~ John Muir "When we tug a single thing on an old truck, we find it falls off" ~ me Some TF series details & TF heater pics

Entire Thread
Subject	Posted By	Posted
replacing bearings and the new rollers dont go all the way on	AZgeoman	04/07/2013 2:44 PM
Re: replacing bearings and the new rollers dont go all the way on	Pre '68 Dave	04/07/2013 5:17 PM
Re: replacing bearings and the new rollers dont go all the way on	crenwelge	04/07/2013 6:59 PM
Re: replacing bearings and the new rollers dont go all the way on	Denny Graham	04/07/2013 8:29 PM
Re: replacing bearings and the new rollers dont go all the way on	crenwelge	04/07/2013 10:10 PM
Re: replacing bearings and the new rollers dont go all the way on	Flxible	04/07/2013 10:55 PM
Re: replacing bearings and the new rollers dont go all the way on	Denny Graham	04/08/2013 3:49 AM
Re: replacing bearings and the new rollers dont go all the way on	Flxible	04/08/2013 9:33 AM
Re: replacing bearings and the new rollers dont go all the way on	AZgeoman	04/08/2013 10:55 AM
Re: replacing bearings and the new rollers dont go all the way on	Truckrolet	04/08/2013 3:32 PM
Re: replacing bearings and the new rollers dont go all the way on	Ghostrider	04/08/2013 3:53 PM
Re: replacing bearings and the new rollers dont go all the way on	Denny Graham	04/08/2013 6:04 PM
Re: replacing bearings and the new rollers dont go all the way on	Flxible	04/08/2013 8:12 PM
Re: replacing bearings and the new rollers dont go all the way on	crenwelge	04/09/2013 2:50 AM

Moderated by Dusty53, SWEET

Hop To

Link Copied to Clipboard