Thanks Bill, put that in the data base. Won't fit my 3600's for
sure but if I run into a 1/2 ton road runner that someone wants
rollers in I'll have the numbers.
What exactly so ya mean, "dimensions are not an exact match?"
How could they be used if they don't fit? Is there some sort of
modification that needs to be accomplished before you can
install them? I mean ID & OD have to be the same unless you
have the capability to turn the spindle and hub. It wouldn't
surprise me if the thickness of a roller was more than a caged
ball but there is usually enough thread on the spindle to
adjust for that as long as you can still get a pin thru the
nut.
Just looking thru my reference material and those are the same
numbers the Charlie posted once before, Thanks guys, got them
both in the data base now.
Denny G
Sandwich, IL
Last edited by Denny Graham; 04/08/2013 4:04 AM.
