| |
Click on image for the lowdown. 
====
|
| | Forums66 Topics128,052 Posts1,055,725 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
|
| THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
|
| 
#93374 11/08/2005 9:10 PM | Joined: Apr 2000 Posts: 247 Member | | Member Joined: Apr 2000 Posts: 247 | Test the glow plugs. They should have a low resistance (0-50 ohms typical). Test the voltage at the glow plugs - you should see close to battery voltage (12v) at the glow plugs for 15-20 seconds.
If you just want to get it started, first plug in the block heater (if you have one) to get it good and warm, then put a jumper between the battery and the glow plugs for about 15 seconds - then crank. | | |
|
|
| |
