The Stovebolt Site Forums The Shop Area The Electrical Bay Going to 12 volts- no floor start?

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

2 members (Guitplayer, 1 invisible), 80 guests, and 0 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,108

Posts1,056,566

Members48,448

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: Going to 12 volts- no floor start? #93291 10/26/2005 2:26 AM
Joined: Dec 2002 Posts: 571 Tarpon Springs, FL S Shipwright Shop Shark
Shipwright Shop Shark S Joined: Dec 2002 Posts: 571 Tarpon Springs, FL	If you use your 6 volt starter, you will have to use the flywheel off of the older engine. If you go 12 volts, you will need the flywheel from the later engine (they have different # of teeth). You can use the foot starter with either. My Truck Photos My Truck Video

Entire Thread
Subject	Posted By	Posted
Going to 12 volts- no floor start?	1953smoker	10/26/2005 1:46 AM
Re: Going to 12 volts- no floor start?	Hotrod Lincoln	10/26/2005 2:11 AM
Re: Going to 12 volts- no floor start?	Shipwright	10/26/2005 2:26 AM
Re: Going to 12 volts- no floor start?	1953smoker	10/26/2005 2:54 AM
Re: Going to 12 volts- no floor start?	Cletis	10/26/2005 2:56 AM
Re: Going to 12 volts- no floor start?	1953smoker	10/26/2005 2:56 AM
Re: Going to 12 volts- no floor start?	Cletis	10/26/2005 3:00 AM
Re: Going to 12 volts- no floor start?	manfighter16	10/26/2005 8:11 PM
Re: Going to 12 volts- no floor start?	Shipwright	10/27/2005 4:01 AM
Re: Going to 12 volts- no floor start?	JiMerit Boltr#43	10/27/2005 3:51 PM
Re: Going to 12 volts- no floor start?	Glenn A. Foster	11/11/2005 10:00 PM
Re: Going to 12 volts- no floor start?	atomarc	11/11/2005 10:14 PM
Re: Going to 12 volts- no floor start?	steve sr	11/12/2005 5:44 AM
Re: Going to 12 volts- no floor start?	PAPA ED'S 54	11/14/2005 8:08 PM
Re: Going to 12 volts- no floor start?	cmayna	11/20/2005 5:21 PM
Re: Going to 12 volts- no floor start?	OldSub	11/20/2005 11:12 PM

Moderated by Jon G, Rusty Rod

Hop To

Link Copied to Clipboard