| |
Click on image for the lowdown. 
====
| | |
10 members (JW51, Tinker5, TUTS 59, wilbur53, 3B, jupitor, GMCJammer51, J Lucas, walter74, dt235sd),
158
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,080 Posts1,055,952 Members48,430 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2010 Posts: 253 Shop Shark | | Shop Shark Joined: Dec 2010 Posts: 253 | On a project truck I have with a Carter YF carburetor I have a stumble coming off idle when I accelerate. It's noticeably worse when the motor warms up. Once I get past that it runs cleanly and drives well.Points and timing are good and the vacuum advance works properly so I thinks it's the carb. The idle bleed screw is set spot on also. One other thing I'll mention is that the fuel mileage is not good for a small six. All this leads me to believe that the float level may be too high but I haven't had it apart yet and don't have the specs to set it.
I'm looking for suggestions on this and a ya or nay on my float level idea.
-Mike-
1945 Chevrolet G 506 1.5 Ton Military 4X4
1967 Jeep Cj5 with 283 SBC
| | |
|
|
| |
