| |
Click on image for the lowdown. 
====
| | |
9 members (Steveoreno, greenie-reddy, 78buckshot, Waveski, Jay R, carbking, Ridgeback, Forty9, 1 invisible),
72
guests, and
4
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,180 Posts1,057,164 Members48,465 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: May 2005 Posts: 487 'Bolter | | 'Bolter Joined: May 2005 Posts: 487 | I have a 55.1 with the GMC dash. I used a system from Old Air Products. They worked with me to piece together a system. The normal unit fit under the dash, but I had to build a shortened glove box insert, about 3" deep. I mounted the controls in the ash tray hole. I put a single vent under the middle of the dash and a ball vent in each corner. I reworked the ebrake rod to move the release knob over to the right a few inches. It works well but the vents are mounted low and so I don't get air in the face. This makes it seem to cool more slowly. I should (and may) swap the center vent and put the vent in the ash tray hole and the controls under the dash.
regards,
Leon | | |
|
|
| |
