Cabs are all the same. Usually with the bigger truck you will have some additional parts on the firewall for the hydro-vac and 2-speed rear end if so equipped. It is all easily removed for a 1/2-ton application. The large truck cabs can be a good option sometimes, often they are lower mileage than the small trucks and rust issues may not be as severe in the floors/cowl area. The also offer an easy upgrade to a 5-window if you like that look. Other things to look for which I have found common on the large trucks, upgraded Air-Flow heater, deluxe cab stainless trim, and often uncut dashboards Because PO had not tried to fit in aftermarket radios. Here is a good example this is a 1950 2-ton I paid $150 for a couple years ago. I stripped it in place and the owner scrapped all the rest for another $200.
http://www.flickr.com/photos/advance-design_parts_co/8130558268/in/set-72157631870734114