Ahh.. there are more spots to look!

Well, this is what is on the passenger side of the block between the dist and fuel pump:

[img]http://www.42gpw.com/stovebolts/szP1140001.jpg[/img]
3769716

And here is what is on the head, roughly about cylinder 2-3

http://www.42gpw.com/stovebolts/szP1140003.jpg
3836848

So it looks like a 1960's 235 with the 'better' heads?

Would these heads be interchangeable with a mid 50's block? This engine was not running. Another engine I have is a runner, but if these 'better' heads will fit I'll swap them for the gain.


Last edited by pfarber; 01/14/2013 8:48 PM.