| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,180 Posts1,057,163 Members48,464 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#89759 03/08/2003 3:52 AM | Joined: Nov 2002 Posts: 48 Wrench Fetcher | | Wrench Fetcher Joined: Nov 2002 Posts: 48 | I just upgraded to 12 V and everything works great accept for the turn signals. I upgraded the flasher to a 12V I have installed original tail lights with 2 single filiment bulbs in each. One bulb for the taillights and one for the brake lights. It looks like when they added the turn signal unit they tagged into the brake wire. But I also have two aditional wires going to the rear as if to the tail lights but neither has voltage even with the key on and the turn signal lever pressed. Does anybody have a wire schematic for turn signal installation on AD P/U's where do the ground go and how does power flow? So I can rewire this mess. Thanks Zach
If you need a tool and don't buy it, you will find you have paid for it and don't have it.
| | |
|
|
| |
