| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,100 Posts1,056,177 Members48,436 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2011 Posts: 277 'Bolter | | 'Bolter Joined: Mar 2011 Posts: 277 | My experience is that most strippers only remove one layer at a time. I would use a water base stripper and a scotchbrite pad. Lay a uniform layer of stripper down with a brush and wait a few minutes then scrub it with the scotchbrite pad and warm soapy water. Do small areas at a time, no more than two square feet.
When you are finished I would lightly go over everything with rubbing compound to make the newly exposed finish look uniform.
Well, that's what I would do.
Joe
1955 First Series 3100
| | |
|
|
| |
