Classic Industries has a mounting bracket (page 49, OEM to Procar bench seats) that I'm going to mimmick (I hope!). My thought process is that I still have the original seat frame that held the back and bottom. Rather than cut the riser out, I'm putting the frame back down on it after I weld some flat stock or angle stock into the old frame. I may end up having to cut the old frame back off in order to get the seats to move and recline, but for now, I'm going to try and keep everything as whole as possible.
Last edited by f18delta; 08/28/2012 3:23 PM. Reason: Added page #
