The Stovebolt Site Forums The Shop Area Making a Stovebolt Bed bed height 1937 Chev 1/2 Ton

Hi, I recently purchased a new bed fabricated to match the original look but including a steel deck. All made from 3mm steel.Because of the strength of the bed there are no cross bearers running across the width of the tray.
I have looked at the bed mounting blocks available but they are all too small and must take account of Cross bearers running the width of the tray of the original

Does any one have the measurements between the chassis and the actual deck

Seems to be about 5 1/2 inches at front and 3 1/4 inches at rear

Thanks