| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,095 Posts1,056,072 Members48,433 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#86638 01/09/2005 6:42 AM | Joined: Sep 2001 Posts: 29,269 Bubba - Curmudgeon | | Bubba - Curmudgeon Joined: Sep 2001 Posts: 29,269 | 53ChevyTruck,
What you show is where it is routed on a 1954 truck. The wire is held in place with two wire clips attached to holes in the inner fender (behind the grill).
Look at Section 12, Sheet 3.00 in the Factory Assemnly Manual (FAM). At the upper left of the drawing is the labelled Parking Lamp wire (violet). If you follow this wire down, you will see it goes through your "gap" to the right of the radiator support.
Section 12, Sheet 1.04 gives a poor depiction of the clips (451314) on the inner fender behind the grill. Does the inner fender on your '53 have holes on the inner fenders as shown for the '54 in the FAM?
Tim | | |
|
|
| |
