| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,162 Posts1,057,059 Members48,463 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2009 Posts: 66 Wrench Fetcher | | Wrench Fetcher Joined: Dec 2009 Posts: 66 | I don't know about a 42 but my 37 took a carrage bolt, 2 per side. Yes, it does go through the rad. support brace. I had to snake them through the radiator frame with mig welding wire.Just wrap it around the bolt after feeding it through the fender side. Then gently pull it back to fit it into the square bolt hole. It takes a little practice but can be done. After you get the first one through place a nut on it to hold it in place. I used SS carrage bolts from Home Depot. Can't give you a pix as it is in place.
Al | | |
|
|
| |
