| |
Click on image for the lowdown. 
====
| | |
1 members (Samantha),
45
guests, and
4
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,179 Posts1,057,159 Members48,465 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jul 2010 Posts: 59 'Bolter | | 'Bolter Joined: Jul 2010 Posts: 59 | Dont have the riveting tools but i do have access to mill and a lathe should i decide to go that route. I am really going back and forth. My thoughts of welding was to plug weld the original rivet holes by opening up the frame holes enough to get good penetration between the frame and crossmember. I guess i hadnt considered that the bolts wont have the same stress either given the same thoughts i had for the crossmember no longer seeing the same stress as original configuration.
1955.1 GMC Suburban Hydramatic
| | |
|
|
| |
