| |
Click on image for the lowdown. 
====
| | |
2 members (TUTS 59, RLB),
121
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,080 Posts1,055,954 Members48,430 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2005 Posts: 547 'Bolter | | 'Bolter Joined: Dec 2005 Posts: 547 | I have already rebuilt both of my vent window assemblies, but when putting the glass in on the passenger side it went a little caddy-wompus and I can't shut the vent window. I couldn't pull the glass back out and re-set it either. It was stuck in there good!
So, first question: What can I do to remove the glass from the frame without breaking it? I have heard of using mineral spirits to soften up the setting tape?
Second: What technique would be best when setting the glass in the frame to make sure it is square and will operate properly when installed in the assembly?
Thank you very much for any help!
p.s. I used the tech tip in my original en devour and it helped alot!
58' 3200 235 3-speed/OD
| | |
|
|
| |
