Sorry Curt, I don't mean to knock your findings, but I find it really hard to believe that SKF doesn't
make a Speedi-Sleeve that will fit your application. I think is more like you haven’t found the right
source for the sleeves.
http://www.skf.com/files/344136.pdf SKF Speedi-Sleeves are made to cover a range from .5” to 8” and even if your application is a
couple of thousands under a standard size Loctite makes a whole range of Retaining Compounds
engineered to fill gaps in loose fitting bearings. Here is an example of one that I keep around the
shop:
http://www.pbase.com/dennygraham/image/140252513/large The sleeves and the compounds are readily available at any well stocked bearing suppliers such
as Motion Industries who has branches all over the country.
I worked with high tech resins and composites for a decade before I retired and it’s my own
personal opinion, but I would definitely not consider using a filled epoxy as a sealing surface.
Denny Graham
Sandwich, IL
