| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,016 Posts1,055,337 Members48,419 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#80215 07/20/2007 2:37 PM | Joined: Oct 2006 Posts: 9,671 'Bolter | | 'Bolter Joined: Oct 2006 Posts: 9,671 | Hi Bob,
Once you have removed the bolt from the pan that holds the lower bracket, the tube, having a slight taper is simply pressed into the block. to remove it just use a soft hammer and lightly tap it back and forth at the top a few times and it will begin to work it's way out. Your correct, it is easley bent so also use care when you tap it back in.
Denny Graham
Sandwich, IL
Denny G
Sandwich, IL
| | |
|
|
| |
