I have a 52 with a 216. The oil filter canister is cast and bolts to the side of the block and has no lines running to it I've seen some that are stamped metal and bolt to the side of intake with lines running to it. I can't figure out what oil filter to get. I picked up a Fram C4P which is for bypass oiling. It didn't fit, too large in diameter, bottoms out on the taper at the bottom of the canister. There is a Fram C4 but RockAuto says it's for full flow, I only thought these were bypass flow?

Here's a pic of the canister. You will note there is tube in the bottom of the canister. This tube sticks up a little and seems to interfere with the filter thats currently in it. Does anyone know what filter is the correct one. Any input would be much appreciated, thanks in advance!

[IMG]http://i595.photobucket.com/albums/tt35/rjamsehuss/IMG_1269.jpg[/IMG]

[IMG]http://i595.photobucket.com/albums/tt35/rjamsehuss/IMG_1266.jpg[/IMG]

Last edited by hussey; 11/18/2011 4:56 AM.