| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,080 Posts1,055,953 Members48,430 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#78047 05/26/2007 1:50 PM | Joined: Oct 2005 Posts: 1,317 Shop Shark | | Shop Shark Joined: Oct 2005 Posts: 1,317 | Not that this is going to be any help, but I've used the H/W on my 235....didn't experience any problems with the secondaries. Was wondering if this backfire was experienced under load or just free-winding? Also, make sure you're tapped into the correct vac port on the carb.
I had a little trouble getting the carb to adaptor bracket to seal up....a bit of a miss-alignment with the slotted adaptor holes. Sure sounds like you might have a lean situation. Would imagine a call to Tom L. might be in order.
He'll bend over backwards to make sure you're a satisfied customer.
Dave | | |
|
|
| |
