The Stovebolt Site Forums The Shop Area Engine Shop Rochester B jet size for early 216

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

2 members (RLB, carbking), 68 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,105

Posts1,056,541

Members48,448

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: Rochester B jet size for early 216 #76905 05/07/2007 9:47 PM
Joined: Jun 2004 Posts: 8,597 Overland Park, Ks. W Wrenchbender Ret. Riding in the Passing Lane
Wrenchbender Ret. Riding in the Passing Lane W Joined: Jun 2004 Posts: 8,597 Overland Park, Ks.	I wouldn,t go any lower with the float. It could be to much spark advance. Some engines if you get too much advance will run rough at part throttle. Try it with the vacuum line to the advance disconnected. They say money can't buy happiness. It can buy old Chevy trucks though. Same thing. 1972 Chevy c10 Cheyenne Super In the Gallery Forum

Entire Thread
Subject	Posted By	Posted
Rochester B jet size for early 216	On the road	04/30/2007 9:15 PM
Re: Rochester B jet size for early 216	4ontheFloor	04/30/2007 9:48 PM
Re: Rochester B jet size for early 216	On the road	04/30/2007 9:56 PM
Re: Rochester B jet size for early 216	Wrenchbender Ret.	04/30/2007 11:20 PM
Re: Rochester B jet size for early 216	On the road	05/01/2007 12:38 AM
Re: Rochester B jet size for early 216	Oilrag	05/01/2007 2:09 AM
Re: Rochester B jet size for early 216	carbking	05/01/2007 3:07 AM
Re: Rochester B jet size for early 216	carbking	05/01/2007 3:09 AM
Re: Rochester B jet size for early 216	4ontheFloor	05/01/2007 7:30 AM
Re: Rochester B jet size for early 216	On the road	05/01/2007 2:43 PM
Re: Rochester B jet size for early 216	On the road	05/07/2007 3:28 PM
Re: Rochester B jet size for early 216	Wrenchbender Ret.	05/07/2007 9:47 PM
Re: Rochester B jet size for early 216	On the road	05/07/2007 11:43 PM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard