| |
Click on image for the lowdown. 
====
| | |
1 members (klhansen),
119
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,151 Posts1,056,997 Members48,460 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2004 Posts: 1,897 Shop Shark | | Shop Shark Joined: Dec 2004 Posts: 1,897 | drop the transmission first.
Next remove the 2 bolts going through the rear motor mounts (1 on each side) to the crossmember
Next remove the 2 bolts from the motor mount on the front crossmember.
remove any vacuum and oil lines that go from the engine through the firewall or any where else
remove any electrical connections
remove the upper and lower radiator hoses as well as heater hoses if any
remove and plug fuel line from gas tank to fuel pump
The engine and bellhousing with clutch and flywheel can comed out as an assembly. You will not be able to remove the engine with the 4 speed attached, so it will be easier to drop the 4 speed first. This 4 speed weigs in at over 135 lbs, so it is reccomended to use a transmission jack. | | |
|
|
| |
