| |
Click on image for the lowdown. 
====
| | |
9 members (Tronman, tclederman, Bill Hanlon, Otto Skorzeny, Hotrod Lincoln, carbking, 49choptop, Guitplayer, John L.),
145
guests, and
4
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,042 Posts1,055,501 Members48,424 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#76571 04/22/2007 12:35 AM | Joined: Feb 2001 Posts: 1,094 'Bolter | | 'Bolter Joined: Feb 2001 Posts: 1,094 | The nose on some of the starters are different, some old ones bolt to the bellhousing and some bolt to the block.The later models usually had 2 bolts and bolted to the block, there were 2 different noses for the starters, one was for a larger flywheel. pull the starter and look at the nose on both of them and see what you have.Other than that you could take the soeniod off of the starter and look at the engagement between the starter and flywheel, if it's tight there are shims available to shim the starter down from the block. Good luck
Tommy
59 apache 1/2t
261 short stepside
| | |
|
|
| |
