The Stovebolt Site Forums The Shop Area Engine Shop low compression

Labor Day

Labor Day

Putting down your wrenches or time for
MORE wrenching?
Wrenching this Labor Day

Plenty of places to share.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

1 members (baldeagle), 55 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,009

Posts1,055,293

Members48,419

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: low compression crenwelge #740066 04/17/2011 9:13 PM
Joined: Dec 2006 Posts: 1,464 ID W waldo53 Shop Shark
waldo53 Shop Shark W Joined: Dec 2006 Posts: 1,464 ID	Are you using a 12-volt coil or a 6-volt coil? If the 12-volt coil is on there it's going to run lousy or not at all on a 6-volt system.

Entire Thread
Subject	Posted By	Posted
low compression	nels1954	04/15/2011 9:10 AM
Re: low compression	truckernix	04/15/2011 11:14 AM
Re: low compression	Denny Graham	04/15/2011 11:53 AM
Re: low compression	Builder	04/15/2011 2:05 PM
Re: low compression	Joe H	04/15/2011 3:42 PM
Re: low compression	nels1954	04/15/2011 4:07 PM
Re: low compression	Hotrod Lincoln	04/15/2011 4:37 PM
Re: low compression	truckernix	04/15/2011 8:32 PM
Re: low compression	nels1954	04/15/2011 10:53 PM
Re: low compression	dan-pa	04/15/2011 11:35 PM
Re: low compression	Denny Graham	04/16/2011 12:14 AM
Re: low compression	truckernix	04/16/2011 2:10 AM
Re: low compression	nels1954	04/16/2011 10:35 PM
Re: low compression	crenwelge	04/17/2011 7:09 AM
Re: low compression	waldo53	04/17/2011 9:13 PM
Re: low compression	nels1954	04/17/2011 9:55 PM
Re: low compression	kb3csw	04/17/2011 10:36 PM
Re: low compression	crenwelge	04/17/2011 10:48 PM
Re: low compression	nels1954	04/18/2011 7:16 AM
Re: low compression	Builder	04/18/2011 2:15 PM
Re: low compression	don stocker	04/18/2011 2:32 PM
Re: low compression	Hotrod Lincoln	04/15/2011 11:54 PM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard