Welcome Ed, also from Ontario. I did my weather seals just a few months ago, not a 36, but likely similar procedure. I took the doors off, laid them on a table, inside up. I had the rubber seals and the gasket glue, put a bead of glue on the door, left it for about 10 minutes and began applying the seals. Stayed with it and re-stuck it if it worked loose. After 15 minutes, it held and stayed put, wasn't all that difficult. There is an excellent tech tip by Alan Horvath, link is at the top of the page.
Because this is the welcome centre, you could also ask in a different forum, such as interiors. Good luck!
Leo
