The 235 in question is in my 37 and the carb is tilting towards the front and I noticed the front three cylinders running richer then the rears so I will be installing a 37 to 39 intake.
Originally Posted by Pre '68 Dave
Originally Posted by Jeff Ogden
I will be installing a 216 intake on a 57 235 so I can get the carb to set level.
216s and 235s both set the carb the same, level on the angled engine.

The bolt spacing for the intake to exhaust is different between 216 and 235 so you must use as a pair.

216 manifolds up through 1948 have the exhaust dump straight down. all 216 and 235s after that angle back.

1937 Chevy 1/2-ton pickup