Ok guys we cheated a lil bit to get it out yes the body was one and yes we cam out the back but as you can see inthe one pics the upper part of the wood gave way when we did it which helped we came straight back as far as we could then started to rotar the back side of the wood up and out and various angle and with a lil UMPF LOL it popped out we only broke free one side of the channel too the main problem getting the woood up from the get go was the rolled edge in the wheel wells one we got past the getting it to the back wasnt so bad (soory i jumped around in my discription)
Channel still in pass side
http://i89.photobucket.com/albums/k237/bigtony55/IMAG1635.jpgChannel out driver side
http://i89.photobucket.com/albums/k237/bigtony55/IMAG1634.jpgfloor out one peace
http://i89.photobucket.com/albums/k237/bigtony55/IMAG1624.jpgunderside will all braces still attached
http://i89.photobucket.com/albums/k237/bigtony55/IMAG1625.jpgCHEATER CORNER THAT GAVE WAY
http://i89.photobucket.com/albums/k237/bigtony55/IMAG1626.jpg
