Yep, shade tree overload springs! If they're welded, particularly if it's at both ends, they will break off eventually. I'd suggest jacking the rear end up to relieve as much tension as possible, and use a cutoff wheel on a small hand-held grinder to remove them. It's not uncommon to get some frame bending at the top side if the load gets heavy enough- - - - -without a spring perch or a crossmember, that spot's not designed to carry suspension loads!
Jerry

Last edited by Hotrod Lincoln; 03/11/2011 9:40 PM.
"It is better to be silent and be thought a fool than to speak and eliminate all doubt!" - Abraham Lincoln
Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt!
There is nothing noble in being superior to your fellow man; true nobility is being superior to your former self. - Ernest Hemingway
Love your enemies and drive 'em nuts!