| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,161 Posts1,056,906 Members48,458 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2006 Posts: 1,703 Shop Shark | | Shop Shark Joined: Mar 2006 Posts: 1,703 | if ya have the bed mounted, here is how I did mine.
I bolted the lower front of the fender to the running boards and supported the rear bottom edge with my floor jack and eye balled the opening of the fender in relation too the tire by slowly jacking up the rear of the fender till it looked right all round the tire and the fender and then got out my tape measure and fine tuned it till I had the same "GAP" all round...then I marked the holes using the fender holes as a template, removed the fender and drilled my holes. | | |
|
|
| |
