i am able to use the stock throttle pedal to the stock/ modified push rod.
from there it's to a bell crank from mr. gasket.
these are available from various dealers and the price ranges from $18.00 to $32.00.
and they are ALL the same part.
Part Number: 1523 >
http://www.mr-gasket.com/ProductDet...uctID=6437566&txtSearch=bell%20crank universal bell crank kit
This bell crank kit features 12 mounting holes for multi-arm positioning and can be used in either push or pull type throttle linkages. Center hole is 1/4" dia. for easy mounting. Each arm has 3 holes for various throttle ratios. Kit includes all hardware needed for installation along with universal throttle bracket.
I made a 1/8'' plate that bolts to my 292 engine side below the exh headers, to hold the bell crank and lokar 2 foot cable. this then goes up to the 500 edelbrock carb mounted 180 from what jack halton does. My secondaries are outboard/ primaries are inboard. the E-choke is @ the rear w/ my wire running along the fuel line that goes round the front of the valve cover to the harness and firewall hole.
It all looks stock from inside the cab.
